China OEM Miniature High Precision Planetary Gearbox for Portable Analytical Devices car gearbox

Product Description

 
 

Product Description

Product Parameters

Parameters Unit Level Reduction Ratio Flange Size Specification
060 090 115 142 180 220 280 330 400
Rated Output Torque T2n N.m 1 3 27.8 115 212 470 1226 1730 4230 8200 12500
4 46.32 142 268 582 1450 2270 5120 9800 16000
5 46.32 142 268 582 1450 2270 5120 8500 12200
7 38.9 110 212 468 1130 1610 3220 5000 7600
10 18.5 100 95 255 730 1050 1820 3500 5000
2 12 46.32 142 268 582 1450 2270 5120 9800 16000
15 46.32 142 268 582 1450 2270 5120 8500 12200
20 46.32 142 268 582 1450 2270 5120 9800 16000
25 46.32 142 268 582 1450 2270 5120 8500 12200
28 46.32 142 268 582 1450 2270 5120 9800 16000
30 27.8 115 212 470 1226 1730 4230 8200 12500
35 46.32 142 268 582 1450 2270 5120 8500 12200
40 46.32 142 268 582 1450 2270 5120 9800 16000
50 46.32 142 268 582 1450 2270 5120 8500 12200
70 38.9 110 212 468 1130 1610 3220 5000 7600
100 18.5 100 95 255 730 1050 1820 3500 5000
3 120 46.32 142 268 582 1450 2270 5120 9800 16000
150 46.32 142 268 582 1450 2270 5120 8500 12200
200 46.32 142 268 582 1450 2270 5120 9800 16000
250 46.32 142 268 582 1450 2270 5120 8500 12200
280 46.32 142 268 582 1450 2270 5120 9800 16000
350 46.32 142 268 582 1450 2270 5120 8500 12200
400 46.32 142 268 582 1450 2270 5120 9800 16000
500 46.32 142 268 582 1450 2270 5120 8500 12200
700 38.9 110 212 468 1130 1610 3220 5000 7600
1000 18.5 100 95 255 730 1050 1820 3500 5000
Maximum Output Torque T2b N.m 1,2,3 3~1000 2Times of Rated Output Torque
Rated Input Speed N1n rpm 1,2,3 3~1000 4000 3500 3500 3000 3000 2500 2000 1500 1500
Maximum Input Speed N1b rpm 1,2,3 3~1000 8000 7000 7000 5000 5000 4000 3000 2000 2000
Precision Backlash P1 arcmin 1 3~1000 ≤4 ≤4 ≤4 ≤4 ≤4 ≤4 ≤8 ≤8 ≤8
arcmin 2 3~1000 ≤6 ≤6 ≤6 ≤6 ≤6 ≤6 ≤12 ≤12 ≤12
arcmin 3 3~1000 ≤8 ≤8 ≤8 ≤8 ≤8 ≤8 ≤16 ≤16 ≤16
Standard Backlash P2 arcmin 1 3~1000 ≤8 ≤8 ≤8 ≤8 ≤8 ≤8 ≤12 ≤12 ≤12
arcmin 2 3~1000 ≤10 ≤10 ≤10 ≤10 ≤10 ≤10 ≤18 ≤18 ≤18
arcmin 3 3~1000 ≤12 ≤12 ≤12 ≤12 ≤12 ≤12 ≤24 ≤24 ≤24
Torsional Rigidity Nm/arcmin 1,2,3 3~1000 7 14 25 50 145 225 300 330 350
Allowable Radial Force F2rb2 N 1,2,3 3~1000 1550 3250 6700 9400 14500 50000 60000 70000 90000
Allowable Axial Force F2ab2 N 1,2,3 3~1000 775 1625 3350 4700 7250 25000 30000 95000 1250000
Moment of Inertia J1 kg.cm2 1 3~10 0.18 0.75 2.85 12.4 15.3 34.8 44.9 80 255
2 12~100 0.15 0.52 2.15 7.6 15.2 32.2 41.8 75 240
3 120~1000 0.07 0.36 2.05 6.3 14.2 18.3 28.1 68 220
Service Life hr 1,2,3 3~1000 20000
Efficiency η % 1 3~10 95%
2 12~100 92%
3 120~1000 85%
Noise Level dB 1,2,3 3~1000 ≤58 ≤62 ≤65 ≤70 ≤70 ≤75 ≤75 ≤75 ≤75
Operating Temperature ºC 1,2,3 3~1000 -10~+90
Protection Class IP 1,2,3 3~1000 IP65
Weights kg 1 3~10 1.3 3.6 7.5 16 28 48 110 160 250
2 12~100 1.5 4.2 9.5 20 32 60 135 190 340
3 120~1000 1.8 4.8 11.5 24 36 72 150 225 420

FAQ

Q: How to select a gearbox?

A: Firstly, determine the torque and speed requirements for your application. Consider the load characteristics, operating environment, and duty cycle. Then, choose the appropriate gearbox type, such as planetary, worm, or helical, based on the specific needs of your system. Ensure compatibility with the motor and other mechanical components in your setup. Lastly, consider factors like efficiency, backlash, and size to make an informed selection.

Q: What type of motor can be paired with a gearbox?

A: Gearboxes can be paired with various types of motors, including servo motors, stepper motors, and brushed or brushless DC motors. The choice depends on the specific application requirements, such as speed, torque, and precision. Ensure compatibility between the gearbox and motor specifications for seamless integration.

Q: Does a gearbox require maintenance, and how is it maintained?

A: Gearboxes typically require minimal maintenance. Regularly check for signs of wear, lubricate as per the manufacturer’s recommendations, and replace lubricants at specified intervals. Performing routine inspections can help identify issues early and extend the lifespan of the gearbox.

Q: What is the lifespan of a gearbox?

A: The lifespan of a gearbox depends on factors such as load conditions, operating environment, and maintenance practices. A well-maintained gearbox can last for several years. Regularly monitor its condition and address any issues promptly to ensure a longer operational life.

Q: What is the slowest speed a gearbox can achieve?

A: Gearboxes are capable of achieving very slow speeds, depending on their design and gear ratio. Some gearboxes are specifically designed for low-speed applications, and the choice should align with the specific speed requirements of your system.

Q: What is the maximum reduction ratio of a gearbox?

A: The maximum reduction ratio of a gearbox depends on its design and configuration. Gearboxes can achieve various reduction ratios, and it’s important to choose 1 that meets the torque and speed requirements of your application. Consult the gearbox specifications or contact the manufacturer for detailed information on available reduction ratios.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Machinery, Agricultural Machinery, Gearbox
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Three-Step
Customization:
Available

|

Customized Request

planetary gearbox

Role of Planetary Gearboxes in Powertrain Systems of Electric and Hybrid Vehicles

Planetary gearboxes play a critical role in the powertrain systems of both electric and hybrid vehicles, contributing to their efficiency and performance:

Electric Motor Integration: In electric vehicles (EVs) and hybrid vehicles, planetary gearboxes are commonly used to connect the electric motor to the drivetrain. They enable torque and speed transformation, ensuring the motor’s output is suitable for the vehicle’s desired speed range and load conditions.

Torque Splitting in Hybrids: Hybrid vehicles often have both an internal combustion engine (ICE) and an electric motor. Planetary gearboxes enable torque splitting between the two power sources, optimizing their combined performance for various driving scenarios, such as electric-only mode, hybrid mode, and regenerative braking.

Regenerative Braking: Planetary gearboxes facilitate regenerative braking in electric and hybrid vehicles. They enable the electric motor to function as a generator, converting kinetic energy into electrical energy during deceleration. This energy can then be stored in the vehicle’s battery for later use.

Compact Design: Planetary gearboxes offer a compact design with a high power density, making them suitable for the limited space available in electric and hybrid vehicles. This compactness allows manufacturers to maximize interior space and accommodate battery packs, drivetrain components, and other systems.

Efficient Power Distribution: The unique arrangement of planetary gears allows for efficient power distribution and torque management. This is particularly important in electric and hybrid powertrains, where optimal power allocation between different components contributes to overall efficiency.

CVT Functionality: Some hybrid vehicles incorporate Continuously Variable Transmission (CVT) functionality using planetary gearsets. This enables seamless and efficient transitions between various gear ratios, improving the driving experience and enhancing fuel efficiency.

Performance Modes: Planetary gearboxes facilitate the implementation of different performance modes in electric and hybrid vehicles. These modes, such as “Sport” or “Eco,” adjust the power distribution and gear ratios to optimize performance or energy efficiency based on the driver’s preferences.

Reduction Gear for Electric Motors: Electric motors often operate at high speeds and require reduction gearing to match the vehicle’s requirements. Planetary gearboxes provide the necessary gear reduction while maintaining efficiency and torque output.

Efficient Torque Transfer: Planetary gearboxes ensure efficient transfer of torque from the power source to the wheels, resulting in smooth acceleration and responsive performance in electric and hybrid vehicles.

Integration with Energy Storage: Planetary gearboxes contribute to the integration of energy storage systems, such as lithium-ion batteries, by efficiently connecting the power source to the drivetrain while managing power delivery and regeneration.

In summary, planetary gearboxes are integral components of the powertrain systems in electric and hybrid vehicles. They enable efficient power distribution, torque transformation, regenerative braking, and various driving modes, contributing to the overall performance, efficiency, and sustainability of these vehicles.

planetary gearbox

Considerations for Selecting Size and Gear Materials in Planetary Gearboxes

Choosing the appropriate size and gear materials for a planetary gearbox is crucial for optimal performance and reliability. Here are the key considerations:

1. Load and Torque Requirements: Evaluate the anticipated load and torque that the gearbox will experience in the application. Select a gearbox size that can handle the maximum load without exceeding its capacity, ensuring reliable and durable operation.

2. Gear Ratio: Determine the required gear ratio to achieve the desired output speed and torque. Different gear ratios are achieved by varying the number of teeth on the gears. Select a gearbox with a suitable gear ratio for your application’s requirements.

3. Efficiency: Consider the efficiency of the gearbox, which is influenced by factors such as gear meshing, bearing losses, and lubrication. A higher efficiency gearbox minimizes energy losses and improves overall system performance.

4. Space Constraints: Evaluate the available space for installing the gearbox. Planetary gearboxes offer compact designs, but it’s essential to ensure that the selected size fits within the available area, especially in applications with limited space.

5. Material Selection: Choose suitable gear materials based on factors like load, speed, and operating conditions. High-quality materials, such as hardened steel or specialized alloys, enhance gear strength, durability, and resistance to wear and fatigue.

6. Lubrication: Proper lubrication is critical for reducing friction and wear in the gearbox. Consider the lubrication requirements of the selected gear materials and ensure the gearbox is designed for efficient lubricant distribution and maintenance.

7. Environmental Conditions: Assess the environmental conditions in which the gearbox will operate. Factors such as temperature, humidity, and exposure to contaminants can impact gear material performance. Choose materials that can withstand the operating environment.

8. Noise and Vibration: Gear material selection can influence noise and vibration levels. Some materials are more adept at dampening vibrations and reducing noise, which is essential for applications where quiet operation is crucial.

9. Cost: Consider the budget for the gearbox and balance the cost of materials, manufacturing, and performance requirements. While high-quality materials may increase initial costs, they can lead to longer gearbox lifespan and reduced maintenance expenses.

10. Manufacturer’s Recommendations: Consult with gearbox manufacturers or experts for guidance on selecting the appropriate size and gear materials. They can provide insights based on their experience and knowledge of various applications.

Ultimately, the proper selection of size and gear materials is vital for achieving reliable, efficient, and long-lasting performance in planetary gearboxes. Taking into account load, gear ratio, materials, lubrication, and other factors ensures the gearbox meets the specific needs of the application.

planetary gearbox

Impact of Gear Ratio on Output Speed and Torque in Planetary Gearboxes

The gear ratio of a planetary gearbox has a significant effect on both the output speed and torque of the system. The gear ratio is defined as the ratio of the number of teeth on the driven gear (output) to the number of teeth on the driving gear (input).

1. Output Speed: The gear ratio determines the relationship between the input and output speeds of the gearbox. A higher gear ratio (more teeth on the output gear) results in a lower output speed compared to the input speed. Conversely, a lower gear ratio (fewer teeth on the output gear) leads to a higher output speed relative to the input speed.

2. Output Torque: The gear ratio also affects the output torque of the gearbox. An increase in gear ratio amplifies the torque delivered at the output, making it higher than the input torque. Conversely, a decrease in gear ratio reduces the output torque relative to the input torque.

The relationship between gear ratio, output speed, and output torque is inversely proportional. This means that as the gear ratio increases and output speed decreases, the output torque proportionally increases. Conversely, as the gear ratio decreases and output speed increases, the output torque proportionally decreases.

It’s important to note that the gear ratio selection in a planetary gearbox involves trade-offs between output speed and torque. Engineers choose a gear ratio that aligns with the specific application’s requirements, considering factors such as desired speed, torque, and efficiency.

China OEM Miniature High Precision Planetary Gearbox for Portable Analytical Devices   car gearbox	China OEM Miniature High Precision Planetary Gearbox for Portable Analytical Devices   car gearbox
editor by CX 2024-05-17