China Transmission Reduction Input Speed 1400rpm High Ratio Mini Planetary Gearbox with Hot selling

Solution Description

Product Description

Transmission Reduction Input Pace 1400rpm High Ratio mini Planetary Gearbox

NGW collection gearboxes consist of single-phase(NGW11-NGW121),two-phase(NGW42-NGW122) and stree-phase(NGW73-NGW123).

one.Design Variety
NGW, NGW-L, NGW-S, NGW-QJ 

two.Apps
NGW Planetary Equipment Units is commonly employed in several regions this kind of as metallurgy, mine, lifting, transportation, textile, cement, gentle sector, chemical, pharmaceutical, dye printing and so on. 

Thorough Photos

three.Merchandise Attributes
(1) Small quantity, gentle weight, well-knitted composition, large transmission energy and large load capacity. In contrast with the ordinary cylindrical equipment reducers of the very same stage, its excess weight is reduced 1/2 and volume is only 1/2-1/3 of the previous.
(2) High transmission efficiency. 1-stage is up to ninety seven%, 2-phase 94%, 3-stage ninety one%.
(3) The assortment of transmission electrical power is quite broad, from 1kw to 1300kw.
(4) NGW Planetary Gear Models is developed with hard-tooth-confronted, and can be utilized extensively and in lengthy interval.
(5) Big transmission ratio 

four.Technological Knowledge(NGW)
First Edition NGW Series
Shafts Placement: In Line
1 Phase: NGW11~NGW121 Ratio: 2.8~12.five
2 Stage: NGW42~NGW122 Ratio: 14~one hundred sixty
three Phase: NGW73~NGW123 Ratio: one hundred eighty~2000

New Design and style NGW Collection
Shafts Situation: In Line, Parallel Shaft
NAD(NAF) – 1 Stage, Foot Mounted(Flange Mounted), In Line
NAZD(NAZF) – 1 Stage, Foot Mounted(Flange Mounted), Parallel Shaft
NBD(NBF) – 2 Phase, Foot Mounted(Flange Mounted), In Line

Item Parameters

NGW-S Series Planetary Gearboxes
Shafts Place: Correct Angle
Gearset: Spiral Bevel Gear Pair Built-in With Planetary Equipment Established
2 Phase: NGW-S42~NGW-S122 Ratio: eleven.2~80
3 Phase: NGW-S73~NGW-S123 Ratio: fifty six~five hundred
 

Phase Model Size                   Ratio Rated Electrical power
Solitary-phase NGW11~NGW121  one~12 two.8~twelve.5 2. 8-1314KW
Two-stage NGW42~NGW122  one~twelve 14-a hundred and sixty .7-517KW
A few-stage NGW73~NGW123  one~six a hundred and eighty-2000 .sixteen-forty seven.1KW

Varieties Sizes Nominal Ratio Input Shaft Dia.(m6) Output Shaft Dia.(n6)
NAD 200,224,…1800,2000 4~5.6

six.3~9

fifty~400mm

forty~360mm

sixty~630mm
NAF 200,224,…five hundred,560 4~5.six

6.3~9

50~130mm

forty~100mm

sixty~220mm
NAZD 200,224,…1400,1600 10~eighteen 30~240mm sixty~560mm
NAZF 200,224,…five hundred,560 ten~eighteen thirty~85mm sixty~220mm
NBD 250,280,…1800,2000 20~25

28~fifty

thirty~280mm eighty~630mm
NBF 250,280,…five hundred,560 twenty~twenty five

28~fifty

30~80mm 80~220mm
NBZD 250,280,…1400,1600 56~125 28~170mm eighty~560mm
NBZF 250,280,…five hundred,560 56~a hundred twenty five 28~55mm eighty~220mm
NCD 315,355,…1800,2000 112~four hundred 25~150mm 120~630mm
NCF 315,355,…500,560 112~four hundred 25~50mm a hundred and twenty~220mm
NCZD 315,355,…1800,2000 450~1250 20~170mm 120~630mm
NCZF 315,355,…five hundred,560 450~1250 twenty five~45mm 120~220mm

Packaging & Shipping and delivery

Company Profile

Right after Sales Service

Pre-sale providers one. Choose gear product.
2.Design and style and manufacture products according to clients’ specific necessity.
3.Train specialized private for clients
Services throughout marketing 1.Pre-check out and accept items forward of delivery.
two. Help clientele to draft resolving ideas.
After-sale services 1.Support consumers to prepare for the first building plan.
2. Prepare the first-line operators.
three.Just take initiative to eliminate the trouble swiftly.
four. Supply technical exchanging.

FAQ

1.Q:What types of gearbox can you produce for us?

A:Principal goods of our business: UDL collection speed variator,RV sequence worm gear reducer, ATA collection shaft mounted gearbox, X,B sequence equipment reducer,
P sequence planetary gearbox and R, S, K, and F series helical-tooth reducer, a lot more
than 1 hundred designs and countless numbers of specs
2.Q:Can you make as per custom made drawing?
A: Yes, we supply custom-made service for buyers.
3.Q:What is your phrases of payment ?
A: thirty% Advance payment by T/T soon after signing the contract.70% just before delivery
four.Q:What is your MOQ?
A: 1 Set

If you have any demand from customers for our products remember to really feel free to get in touch with me.

US $400
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery
Function: Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Customization:

###

Stage Model Size                   Ratio Rated Power
Single-stage NGW11~NGW121  1~12 2.8~12.5 2. 8-1314KW
Two-stage NGW42~NGW122  1~12 14-160 0.7-517KW
Three-stage NGW73~NGW123  1~6 180-2000 0.16-47.1KW

###

Types Sizes Nominal Ratio Input Shaft Dia.(m6) Output Shaft Dia.(n6)
NAD 200,224,…1800,2000 4~5.6

6.3~9

50~400mm

40~360mm

60~630mm
NAF 200,224,…500,560 4~5.6

6.3~9

50~130mm

40~100mm

60~220mm
NAZD 200,224,…1400,1600 10~18 30~240mm 60~560mm
NAZF 200,224,…500,560 10~18 30~85mm 60~220mm
NBD 250,280,…1800,2000 20~25

28~50

30~280mm 80~630mm
NBF 250,280,…500,560 20~25

28~50

30~80mm 80~220mm
NBZD 250,280,…1400,1600 56~125 28~170mm 80~560mm
NBZF 250,280,…500,560 56~125 28~55mm 80~220mm
NCD 315,355,…1800,2000 112~400 25~150mm 120~630mm
NCF 315,355,…500,560 112~400 25~50mm 120~220mm
NCZD 315,355,…1800,2000 450~1250 20~170mm 120~630mm
NCZF 315,355,…500,560 450~1250 25~45mm 120~220mm

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
US $400
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery
Function: Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Customization:

###

Stage Model Size                   Ratio Rated Power
Single-stage NGW11~NGW121  1~12 2.8~12.5 2. 8-1314KW
Two-stage NGW42~NGW122  1~12 14-160 0.7-517KW
Three-stage NGW73~NGW123  1~6 180-2000 0.16-47.1KW

###

Types Sizes Nominal Ratio Input Shaft Dia.(m6) Output Shaft Dia.(n6)
NAD 200,224,…1800,2000 4~5.6

6.3~9

50~400mm

40~360mm

60~630mm
NAF 200,224,…500,560 4~5.6

6.3~9

50~130mm

40~100mm

60~220mm
NAZD 200,224,…1400,1600 10~18 30~240mm 60~560mm
NAZF 200,224,…500,560 10~18 30~85mm 60~220mm
NBD 250,280,…1800,2000 20~25

28~50

30~280mm 80~630mm
NBF 250,280,…500,560 20~25

28~50

30~80mm 80~220mm
NBZD 250,280,…1400,1600 56~125 28~170mm 80~560mm
NBZF 250,280,…500,560 56~125 28~55mm 80~220mm
NCD 315,355,…1800,2000 112~400 25~150mm 120~630mm
NCF 315,355,…500,560 112~400 25~50mm 120~220mm
NCZD 315,355,…1800,2000 450~1250 20~170mm 120~630mm
NCZF 315,355,…500,560 450~1250 25~45mm 120~220mm

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetarygearbox

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

China Transmission Reduction Input Speed 1400rpm High Ratio Mini Planetary Gearbox     with Hot selling		China Transmission Reduction Input Speed 1400rpm High Ratio Mini Planetary Gearbox     with Hot selling
editor by czh 2022-12-25